Check Before Use - Felisatti RH26CVR Manual Del Usuario

• Make sure the battery is attached in the body
of the tool tightly before you start operation.
When the battery is not attached tightly, it may be
fallen during the operation and cause an injury in
the top of your foot.
• Charge only Felisatti appoved rechargeable
batteries. Other types of batteries may burst
causing personal injury and damage
• Do not disassemble battery.
Imcorrect reassembly may result in a risk of
electric shock, electrocution or fire.
• Accessories may be hot after prolonged use.
When removing the bit from the tool avoid contact
with skin and use proper protective gloves when
grasping the bit or accessory.
• Do not make your fingers and hands touch
with the drill bit during operation.
When your fingers and hands are touched with
the drill bit or caught in it, you may be injured
seriously.
• Do not leave the running tool.
Other operators stayed close to you may be
injured.
• Set the forward/reverse lever in the neutral
position while you are changing or operating
the tool.
Careless operating of the switch may cause a
serious injury by the rotating part of the tool.
4

Check before Use

1. The power source
• Observe correct main voltage. The voltage of
power source must agree with the
voltage specified in the name plate.
• Make sure the rated voltage in the electric drill
and the battery are the same. When the rated
voltage of the battery is higher than that of the
electric drill, the motor can be damaged by fire.
2. Attachment of the battery
Make sure the battery is attached correctly before
you use the electric tool.
Make sure the battery is attached in the
body of the tool tightly before you start
operation. When the battery is not
attached tightly, it may be fallen during the
operation and cause an injury in the top of
your foot.
3. Polarity of the battery
When the polarity of the battery is not correct,
it may cause the trouble of the switch. Also, the
reversal of the rotating direction can bring a
dangerous situation.
4. Trial run
Check the tool by a trial run with the grinding
stone faced the place no man there.
2