Adjusting Nylon Line; Adjusting The Handles - Stihl FSE 31 Manual De Instrucciones

5 Adjusting Nylon Line

5 Adjusting Nylon Line
2
1
► Hold the rotating mowing head above the
ground – tap it on the ground once –
about 3 cm fresh line is advanced.
The blade (1) on the deflector (2) trims surplus
line to the correct length – avoid tapping the
mowing head more than once at a time.
Line feed operates only if both lines still have a
minimum length of 2.5 cm.
If the nylon lines are shorter than 2.5cm, readjust
them manually – see "Manual Adjustment of
Nylin Line".
5.1 Manual Adjustment of Nylon
Line
► Switch off the trimmer.
► Disconnect the plug from the wall outlet.
► Turn the trimmer on its back.
2
► Push home the button (1) on the spool as far
as stop.
► Pull the ends of the nylon line (2) out of the
spool.
If the spool is empty, see "Replacing Nylon Line".
0458-280-9821-C
1
2
6

Adjusting the Handles

6.1 Adjusting Length of Shaft (FSE
41 only)
C
3
► Press in the lock button (1).
► Pull the control handle (2) upwards on the
shaft (3) and engage it in one of the 3 posi‐
tions: A, B or C
English
2
1
A
B
25