Unpacking Your Ice Maker; Connecting Your Ice Maker - NewAir NIM026MS00 Manual Del Propietário

UNPACKING YOUR ICE MAKER

1. Remove the exterior and interior packaging. Check if ice basket and ice
scoop inside. If any parts are missing, please contact our customer service.
2. Remove the tapes for fixing ice shovel, ice basket & ice scoop. Clean the
tank & ice basket.
3. Put the ice maker on a level & flat counter top without direct sunlight and
other sources of heat (i.e.: stove, furnace, radiator). Make sure that there
is at least 4 inches gap between the back & sides from the wall.
4. Allow one hour for the refrigerant fluid to settle before plugging the ice
maker in.
5. The appliance must be positioned so that the plug is accessible.
WARNING: Only use drinking water to produce ice.

CONNECTING YOUR ICE MAKER

DANGER: Improper use of the grounded plug can result in the risk of electrical
shock. If the power cord is damaged, please call our customer service.
1. This unit should be properly grounded for your safety. The power cord of
this appliance is equipped with a three-prong plug which mates with
standard three prong wall outlets to minimize the possibility of electric
shock.
2. Plug your appliance into an exclusive, properly installed, grounded wall
outlet. Do not under any circumstances, cut or remove the third (ground)
prong from the power cord. Any questions concerning power and/or
grounding should be directed toward a certified electrician.
3. This appliance requires a standard 110-120volt, 60Hz electrical outlet with
three-prong ground.
www.newair.com
EN
12