Network Requirements - Regent i351s Manual De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
EN
Introduction

Network Requirements

Before use, please check that the following requirements are met:
• Broadband Internet Access - using a wireless access
point, router or similar network device.
• A computer or smartphone capable of connecting to the local network.
Devices should be on the same network as the receiver.
Security measures
• Please read the user manual and its recommendations carefully.
• Please read the manual carefully before starting the equipment for the first time.
• To avoid electric shock, never open the housing. Damage
to the warranty seal will void the warranty.
• Disconnect the device from the mains during lightning storms or when
it is not going to be used for a long time. Remember that the warranty
does not cover damage to the device caused by a lightning strike.
• Do not expose the device to direct sunlight. Keep away from
heat sources and from humid environments. Do not block the
ventilation openings to ensure proper air circulation.
• Place the device in a horizontal position on a flat, even and stable surface.
• If you move the device from a warm to a cold room and vice versa, wait at
least 1 hour before powering up. Failure to do so may cause problems.
• Keep the device away from vases, bottles, aquariums and other water sources in order
to avoid damaging the device. Do not touch the power plug with bare hands.
• Do not place any objects on the housing of the device. Before starting any
maintenance or installation work, disconnect the device from the power supply.
• Do not use alcohol or liquids containing ammonia to clean the device. If necessary,
clean it with a soft, lint-free cloth moistened with a mild soap and water solution.
• Do not connect any cables when the power plug is in the socket.
• Check if you have working cables. Damaged cables can cause a fire.
• Please disconnect the device from the power supply while making the connections.
The description of buttons/functions
Front panel
POWER ON/STANDBY button
1.
2.
Volume knob - turn to adjust the
volume level; press to mute
3.
Infrared sensor
4.
UP/DOWN knob and OK button -
turn to navigate or rewind the track;
press to confirm the selection
5.
HOME button - press to
return to the main menu
Rear panel
11. 3.5mm headphone jack
12. USB port (Output: 5V, 1A)
13. 3.5mm Aux-in Jack
PREVIOUS ◄ button - left/
6.
previous track
NEXT button ► - right/next track
7.
PRESET button - short press to
8.
recall the stored station; press
and hold this button to enter the
station memorization mode
9.
PRESET 1, 2, 3, 4 buttons
10. Color display
14. Power socket
15. Telescopic antenna
EN
Tabla de contenido
loading

Tabla de contenido