Technical Specifications - Regent i351s Manual De Uso

EN
Troubleshooting
Error Solution
There is no display,
Set up the power supply according to the operating instructions
the radio does not
and using the measures provided in the package.
respond to operation
Cannot be operated
Batteries discharged or inserted incorrectly. Check that the
with the remo-
batteries are installed in the correct direction.
te control
DAB + recep- Antenna not fully extended. Change the location of the radio
tion is poor (e.g. closer to the window). Repeat station scan.
Antenna not fully extended. Change the location of the radio
FM reception is poor
(e.g. closer to the window). Repeat station scan.
Poor sound quality Low bit rate file. Check the audio file. Tip: For MP3 files,
while playing music the bit rate should be 192 Kbps or more.
1. Check that the power adapter is connected properly.
The device does
2. The device may malfunction when used in areas with strong radio
not turn on
interference. Correct the cause of the interference or relocate the device.
1. Turn on the sound as it can be muted.
No sound
2. Increase the volume.
1. Check the WLAN function.
2. Try to set the IP address on the device.
3. Activate the DHCP function on the router and re-
Unable to establish
establish the connection with the device.
network connection
4. A firewall is activated in the network - set the appropriate program
in such a way that the device can access the network.
5. Restart the device to force the connection to the network.
1. Check the availability of WLAN on the access point.
A WLAN connection
2. Move the device closer to the router.
cannot be established
3. Make sure the WEP / WPA password is correct.
1. Check the network as well as the access point and firewall.
2. The station may not be available at the moment,
try again later or select another station.
Station not found
3. The station link has been changed or the station
is not transmitting - ask your provider.
4. Link to manually added station is incorrect, make sure it is correct and re-enter.
1. Turn on the alarm.
The alarm is 2. Due to the volume setting, see „No Sound" solutions.
not working 3. The alarm source is set as a station, but no network connection.
Change the alarm source or reconfigure the connection.
1. Check the connection to the network. REGENT i351s and your device
DLNA streaming
must be on the same network. Check that the network status is good.
cannot be performed
2. Make sure the settings on your device are correct.
The normal functioning of the product may be disturbed by strong electromagnetic
Electromagnetic
fields. Reset the product to its original state according to the user manual
interference
to resume normal operation. If problems persist, relocate the receiver.
The system
REGENT i351s is overloaded, please restart the machine.
suddenly freezes

Technical Specifications

Model name
Display
Supported networks
Streaming
Supported Playback
Formats (UPnP)
Supported playback
formats (USB)
Output power (RMS)
Power
FM and DAB frequency
Energy consumption
Standby power consumption
Bluetooth support
Bluetooth operating range
Transmission frequency
Protocols
Working temperature
Working humidity
REGENT i351s
2.4" TFT color display
OPEN, WEP
WPA PSK AES
WPA PSK AES/TKIP
WPA PSK TKIP
WPA 2 PSK AES
WPA 2 PSK AES/TKIP
WPA 2 PSK TKIP
UPnP, DLNA
MP3, WMA, AAC, FLAC, WAV
MP3, WMA, WAV
15W x 2
Input: AC 100-240V ~ 50/60Hz
USB output: DC 5V1A (only for
charging Android phone)
FM: 87.5-108MHz
DAB: 174.928-239.2MHz
30W
< 2W
V5.0
up to 140 meters (open area)
2.4 GHz
A2DP 1.2
0°C~35°C
20%~80%
EN