To Receive A Call - Sony XBA-BT75 Manual De Instrucciones

Calling
(Multi function) button
+/– button
This unit supports outgoing calls from a
Bluetooth mobile phone*.
Check the following before operating the
unit.
– The Bluetooth function is active on the
mobile phone.
– Pairing of this unit and the Bluetooth
mobile phone is complete.
* Outgoing calls cannot be made directly
from this unit.
1
Press and hold the
about  seconds while the unit is
turned off.
The indicator (blue) flashes twice, the
unit turns on and then this unit tries
to connect to the last Bluetooth
mobile phone that was used.
When this unit does not
connect to a Bluetooth mobile
phone automatically
1

To receive a call

1
button for
Make the Bluetooth connection
(HFP or HSP*) from the Bluetooth
mobile phone to this unit.
Refer to the manual supplied with
your Bluetooth mobile phone for
operation details.
The list of recognised devices appears
on the display of the Bluetooth mobile
phone. This unit is displayed as
"XBA-BT75."
If the Bluetooth mobile phone
features both HFP and HSP, set to
HFP.
* For details on profiles, see page 4.
When a ring tone is heard from
the unit, press the
The ring tone may be any one of the
following, depending on your mobile
phone.
– ring tone set on the unit
– ring tone set on the mobile phone
– ring tone set on the mobile phone
only for Bluetooth connection
Note
If you receive a call by pressing the
button on the Bluetooth mobile phone,
some Bluetooth mobile phones may have
handset use priority. In this case, set to
talk with the unit by pressing and
holding the button for about 2
seconds, or by operating the Bluetooth
mobile phone. For details, refer to the
manual supplied with your Bluetooth
mobile phone.
button.
1
Continued
GB