Operation - Ryobi P240 Manual Del Operador

WARNING:
Do not allow familiarity with tools to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict serious injury.
WARNING:
Always wear safety goggles or safety glasses with side
shields when operating tools. Failure to do so could re-
sult in objects being thrown into your eyes, resulting in
possible serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this tool. The use of at-
tachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
You may use this tool for the following purposes:
 Drilling in wood
 Drilling in ceramics, plastics, fiberglass, and laminates
 Drilling in both hard and soft metals
 Using driving accessories, such as driving screws with
screwdriver bits
This product will accept Ryobi One+ 18 V lithium-ion
battery packs and Ryobi One+ 18 V nickel-cadmium battery
packs.
For complete charging instructions, refer to the Operator's
Manual for the battery packs and chargers listed in the
General Safety Rules.
BATTERY PROTECTION FEATURES
Ryobi lithium-ion batteries are designed with features that
protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and
resume operation. If the tool still does not work, the battery
needs to be recharged.
TO INSTALL BATTERY PACK
See Figure 2.
 Lock the switch trigger on the drill by placing the direction
of rotation selector in the center position.
 Place the battery pack in the drill. Align the raised rib on
the battery pack with the groove inside the drill.
 Make sure the latches on each side of the battery pack
snap into place and the battery pack is secured in the
drill before beginning operation.
All manuals and user guides at all-guides.com

OPERATION

9
BATTERY
DEPRESS LATCHES TO
RELEASE BATTERY PACK
TO REMOVE BATTERY PACK
See Figure 2.
 Lock the switch trigger on the drill by placing the direction
of rotation selector in the center position.
 Locate the latches on the side of the battery pack and
depress to release the battery pack from the drill.
 Remove the battery pack from the drill.
LATCHES
Fig. 2