Configure And Operate The Remote Control In 4 Easy Steps; Step 1) Correct Setting Of Time And Day; Step 2) Setting The Automatic Weekly Program - Ferroli ROMEO N Manual De Usuario

2. CONFIGURE AND OPERATE THE REMOTE CONTROL IN 4 EASY STEPS

2.1 (Step 1) Correct setting of time and day

_________________________________________________________________________________________________________________________________________________
1. Press the button
press the buttons
day where DAY 1 is Monday and DAY 7 is Sunday.
2. Press the button
press the buttons
_________________________________________________________________________________________________________________________________________________

2.2 (Step 2) Setting the automatic weekly program

After setting the time and day, the Remote Control will follow the preset automatic program. The heating program includes 6
daily time bands for the temperature level, numbered from 1 to 6. The time bands can be set between 00:00 and 24:00, adjusting
them in 10-minute increments. Each temperature level can be set between 7°C and 32.5°C, adjusting it in 0.1°C increments.
It is therefore possible to program any combination of time and temperature during the day, and each day of the week can be
different. The preset automatic program is as follows:
From Monday to Friday
Start time
Temperature level
From Saturday to Sunday
Start time
Temperature level
. The day starts blinking:
/ to set the correct
. The hour starts blinking:
/
to set the correct
Band 1 Band 2
06:30 08:00
21°C 18°C
Band 1 Band 2
08:00 10:00
21°C 21°C
code 3541Z220 - Rev. 05 - 12/2021
hour from 00 to 23.
3. Press the button
press the buttons
minutes from 00 to 59.
4. Press the button
Band 3 Band 4
12:00 14:00
21°C 18°C
Band 3 Band 4
12:00 14:00
21°C 21°C
. The minutes start blinking:
/ to set the correct
.
Band 5 Band 6
18:00 22:30
21°C 16°C
Band 5 Band 6
18:00 23:00
21°C 16°C
121
EN