Load The Project From The Confighome - At Home Collection Airzone Manual De Instalación

Airzone connection bus (USB). To connect to the Airzone system, use the
supplied USB cable, connect the USB end to the screen and the other end to the
home automation bus of the Airzone system central.
ES
AT-Home connection bus.
EN
Power with external source (supplied) *.
FR
* According to the current local and national regulations, it is mandatory to add a switch
(or other element to disconnect the system) to the external supply wiring so that a
IT
constant separation between poles is guaranteed.
PT
Once all the connections are made, harden the screws located on the bottom using the
provided Allen wrench.
DE

LOAD THE PROJECT FROM THE CONFIGHOME

Once the assembly and connection of the Webserver have been performed, load the
project from the home automation installation into the Webserver.
The project of the installation must have been previously developed using the
ConfigHome software version 3.0.0.0 or newer, (see ConfigHome Configuration Manual),
the ConfigHome projects are saved with the .athome extension.
To load the project into the Webserver, follow the next steps:
·
Locate the Webserver IP address (see section Webserver IP Address).
·
Open the web browser of your PC or Tablet and paste the IP address.
·
Write the user (airzone) and password (athome).
·
Select in the "Cargar configuración" section the project of your home
automation installation (.athome extension) and press "Actualizar" to update it.
·
Select in the "Programaciones horarias" the file with the time schedule (.tss
extension) and press "Actualizar" to update it.
·
Select in the "Escenas" the file with the scenes (.scenes extension) and press
"Actualizar" to update it.
·
Select inside the "Logo" section the logo to appear on the main screen of the 7"
Airzone-AT Home screen (153x42 pixels, in .png format) and press "Actualizar" to
update it.
18