Introduction; Previous Requirements - At Home Collection Airzone Manual De Instalación

INTRODUCTION

The Webserver Cloud Ethernet Airzone-AT Home is a device which enables the
management of AT-Home and Airzone systems using the Cloud platform. Power
supplied through an external provided unit.
Functionalities:
·
Control of up to 30 zones (15 devices per variable).
·
Setting and control of the parameters of every zone (air conditioning, lighting,
blinds and/or curtains, etc.) by Cloud platform.
·
Time schedules of the different devices and scenes.
·
Multiuser and multisession.
·
External control using Cloud platform.
·
Remote firmware updates of the Webserver and connected systems.
·
Remote management and solution of system's errors.

PREVIOUS REQUIREMENTS

Before starting the setup of the Webserver Cloud Ethernet Airzone-AT Home, check
these items:
- Verify that your installation project has been properly loaded on the different
devices of the system (see ConfigHome Configuration Manual).
- In case of having Airzone Air Conditioning system (2016 series, not compatible
with previous series), check that the installation works properly before
connecting to its home automation installation.
Remember: if having various Airzone systems, these must be interconnected by the
domotic bus and all the mainboards of the installation must be correctly addressed (see
Airzone systems Installation Manual).
Note: One only 7" Airzone- AT Home screen installed per home automation system.
This device is not compatible with installations with Zonepad interfaces
([TM/ZO] ZONEPAD [E/S]), graphic Zonepad ([TM/ZO] ZONEPADG [E/S])
and Graphic screen 7" (GRAPHICING7) nor with the AT-Home
conditioning modules.
ES
EN
FR
IT
PT
DE
15