General Requirements - At Home Collection Airzone Manual De Instalación

GENERAL REQUIREMENTS

Strictly follow the directions outlined in this manual:
ES
·
This system must be installed by a qualified technician.
EN
·
Verify that the units to be controlled have been installed according to the
manufacturer's requirements and operate correctly before installing the
FR
Airzone System.
·
Locate and connect all the devices of the installation in accordance with the
IT
electronic regulations in force.
PT
·
Verify that the air conditioning installation to be controlled is in accordance
with the regulations in force.
DE
·
Perform all the connections with total abscense of power suppliance.
·
In order to connect the elements of the system, use a proper cable cable:
shielded twisted pair cable formed by 4 wires: 2x0,22 mm
·
Do not place the system bus close to lines of force, fluorescent lights, LED lamps,
motors, etc. It might cause interference on the communications.
·
Respect the connection polarity of each device. A wrong connection may
seriously damage the product.
·
For elements externally powered at 110 /230 Vac, for the communications, it is
only necessary to connect the poles "A" and "B" of the bus.
·
For elements externally powered at 110/230 Vac, respect the connection
polarity. A wrong grounding may produce electric shocks.
·
According to the current local and national regulations, it is mandatory to add
a switch (or other element to disconnect the system) to the external supply
wiring so that a constant separation between poles is guaranteed. The system
will restart automatically if the supply is eventually turned off.
14
+ 2x0,5mm .
2 2