Reattaching The Refrigerator Doors - Samsung RF265AB Manual Del Usuario

REATTACHING THE REFRIGERATOR DOORS

Assemble the Refrigerator doors
1. Reattach two flat head screws(
screws( ) to the hinge completely.
2
2. Place the hole in the bottom of the door(
hinge ( )
4
Be aware not to miss the hinge cap because it can
be easily taken off.
3. Insert the upper hinge shaft(
corner of the Refrigerator door(
is level between the upper hinge hole(
the cabinet( ) and reattach the hinge screws(
8
ground screw( ) by turning in a clockwise direction.
10
Reconnect the wires.
4. Place the front edge of the top table(
upper hinge( ) and reattach with three screws.
12
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
) and two hex head
1
)over the lower
3
) into the hole on the
5
). Make sure the hinge
6
) and the hole of
7
) and
9
) on the front of the
11
12
10
12
7
8
11
12
11
9
10
5
6
Setting Up _11