Product Description - Dörr SVL-180 PB Manual De Instrucciones

02 | PRODUCT DESCRIPTION

Ultra-fl at LED continuous light for photo and video recordings
•
with powerbank function
For DSLR, DSLM & camcorder with hot shoe mount
•
Brightness dimmable in 5% steps
•
High-grade aluminum housing, with clear structured LED display
•
Colour temperature adjustable from 3200 – 5600 °K
•
Supplied with universal fl ash shoe with ¼" tripod socket, USB-C charging cable,
•
Mini USB charging adapter, diff usor plate, storage pouch
03 | NOMENCLATURE
1 ¼" connection thread
2 LCD display
3 On/Off /Menu button
4 Button +
5 Button –
6 Mini USB output socket „5V out"
7 USB-C „5V in" charging socket
8 Micro USB „5V in" charging socket
9 180 high power LEDs
10 Diff usor plate
10a) Holder for diff usor plate
11 USB-C charging cable
12 Mini USB charging adapter for external devices
13 Universal fl ash hot shoe
13a) Locking screw
14 Storage pouch
04 | BUILT-IN LI-POLYMER BATTERY
04.1 BEFORE FIRST USE, PLEASE FULLY CHARGE THE BUILT-IN LI-PO BATTERY:
Connect the USB-C charging cable (11) with the USB-C „5V in" charging socket (7)
of the video light. While charging you will see the actual charging status
the LCD display (2).
After charging, remove the USB-C charging cable (11) from the video light and the
USB charging source. When the battery is totally empty, the charging time by PC is
about 2 ½ hours.
04.2 BATTERY CAPACITY LEVEL
While charging the battery charging status indicator
will be shown in the display (2).
If LED video light is not in use for a long period of time, we recommend to charge
the battery to about 75% to avoid deep-discharge of battery.
05 | OPERATION
Press On/Off /Menu button (3) for about 3 seconds in order to turn on the LED video
light.
Press On/Off /Menu button (3) shortly to switch from brightness
rature
Press button + for adjustments (4) to increase brightness and colour temperature.
Press button - for adjustments (5) to decrease brightness and colour temperature.
Brightness is adjustable in 5% steps, while colour temperature is adjusted in
100°K steps.
During operation the display (2) show the remaining battery power in h (hours)
or m (minutes).
The battery symbol shows the battery capacity graphically.
Press On/Off /Menu button (3) for approximately 3 seconds in order to turn off the
video light.
Powerbank function
Plug the Mini USB charging adapter for external devices (12) into the Mini USB out-
put socket "5V out" (6) to use the powerbank function. Now you are able to charge
all your devices over USB (we always recommend to use original high-quality USB
cables of the respective devices/manufacturers).
You may use the powerbank function without turning on the video light. Just plug
•
in any USB device – no further action necessary.
It is possible to use video light at 100% power and charge an external device at the
•
same time. This drains the battery empty more quickly.
on
NOTE
During operation the housing and LEDs will warm up, especially when you use
•
the video light and powerbank function at the same time.
Turn off the device after usage by using On/Off/Menu button (3).
•
Disconnect the Mini USB charging adapter for external devices (12) from Mini
•
USB output socket „5V out" (6) – the video light will charge any device con-
nected even if the video light is switched off.
and the symbol Let the device cool down completely, before placing it in the storage pouch.
•
07
and back. The arrow symbol shows the selected menu point.
to colour tempe-