Setting The Time; Weekly Programming - Blyss DCCX1LU-1600 Inicio Rápido

Secondary programmes and functions

SETTING THE TIME

- Press MENU, then + to access the Hor menu.
- Press OK-boost to enter this menu.
- Press + or - to set the day of the week :
d1 = Monday, d2 = Tuesday,...., d7 = Sunday.
- Press OK-boost to validate
- Press + or - to set the hour.
- Press OK-boost to validate.
- Press + or - to set the minutes.
- Press OK-boost to validate.
- Press + or - to select automatic (Auto) or manual (ΠAnu) time setting.
- Press OK-boost to validate.
- Press MENU to exit the menu
. If the icon permanently flashes in programme mode (PrGr), this indi-
cates that the time is offset following a power cut. It is flashing as a time has
not been set.
. Following a power cut, the appliance will automatically restart with all of
the settings used before the cut (if it was on or off before the cut, it will stay
on or off after the cut).
. Automatic time setting is not possible outside France*.
. Select manual time setting if daily automatic time setting is incorrect.

WEEKLY PROGRAMMING

. The time must be set before any programming.
. Nine programmes are available. Each program defines a time period dur-
ing which the towel drying rack can be set to Comfort mode or Boost. Out-
side of this time period, the towel drying rack is in ECO mode
. The time period for one programme may overlap the time period of anoth-
er. In this case, Boost with fan is prioritised over Boost without fan, which is
itself prioritised over Comfort mode.
12
Quick start