Safety Notes; Assembly Of The Screw Valve (Figure B); Inflation - Crivit 284714 Instrucciones De Uso

Inflate all air chambers fully
Do not dive under the device
Only for use in swimming pools
Date of manufacture (month/year):
03/2017
Permitted operating pressure
0.025 bar
0.3 psi

Safety notes

ATTENTION!
There is a risk of tipping, drifting, and drowning
if these instructions are not observed.
WARNING!
Risk of suffocation for children! Do not leave
children unsupervised with the packaging materi-
als or when playing with the article.
WARNING! RISK TO LIFE!
Does not provide protection from drowning!
Only for swimmers!
Risk of injury!
• Only utilise the device for its prescribed use.
• The article may only be used by people who
are familiar with the safety notes.
• Please observe the maximum load-bearing
capacity. The article could be damaged or
the function impeded if the weight limit is
exceeded.
• Inspect the article for damage and wear
before each use. The article may only be
used when in perfect condition! Do not use
the article if there is any visible or suspected
damage.
12 GB/IE
All manuals and user guides at all-guides.com
• Do not use the article if it is losing air.
• Please ensure that the stopper is on the top
of the sun sail as otherwise there is a risk of
tripping.
Avoiding damage to property!
• All inflatable articles are sensitive to cold.
Therefore never unfold and inflate the article
at temperatures below 15 °C!
• If the air pressure increases in direct sunlight,
this must be offset accordingly by allowing
the air to escape.
• Please ensure that the article does not come
into contact with stones, gravel, or pointed
objects – particularly when inflated - and
does not chafe or grind as this can lead to
damage to the materials.
• Only insert suitable pump adapters into the
safety valve. Otherwise the valves could be
damaged.
• Do not overinflate the article as there is a risk
that the welded seams will tear open. Close
the valve securely after inflating the article.
• Avoid contact with sharp, hot, pointed, or
hazardous objects.
Assembly of the screw valve
(figure B)
There is a threaded opening (1a) for the inclu-
ded screw valve (4) on the back of the lounge
island (1).
1. Pull the loop on the screw valve over the threa-
ded opening in such a way that it is located
securely in the groove provided for this purpo-
se.
2. Twist the screw valve into the threaded ope-
ning, turning it clockwise.

Inflation

CAUTION!
• Always inflate all air chambers fully!
• Avoid overinflation, as there is a risk
of overstretching or even ripping the
welded seams.
• Use standard foot pumps or a double
stroke piston pump with the corre-
sponding pump adapters.