Troubleshooting - Reliable Enviromate T730A Manual De Instrucciones

TROUBLESHOOTING

or attempt to repair the unit on your own. Return the unit to Reliable Corporation
PROBLEM
No steam is released through
the steam fittings.
attachments.
Not enough steam pressure.
Pump is not stopping.
POSSIBLE CAUSES
1. Steam unit is not turned on.
heated.
2. Condensation was created
from non-use.
1. Scale may have built up.
1. The dial on the handle may
be set too low.
the pump.
REMEDY
1. Turn steam unit onto the
2nd position.
2. Put required amount of
3. Plug unit into outlet.
tem until steam comes out.
1. Turn the dial until the de-
sired pressure is reached.
1. Press the switch on the
steam handle. Hold for a few
seconds until the pump is
primed.
-
10