Tabla De Contenido - Elcometer 508 Guia Del Usuario

CONTENTS
1 Gauge Overview
2 Box Contents
3 Getting Started
4 Securing the Dolly
5 Preparing the Gauge for Test
6 Performing the Test
7 Assessing the Results (Destructive Testing)
8 After Test
9 Using a Dolly Plug
10 Spares & Accessories
11 Warranty Statement
12 Technical Specification
13 Legal Notices & Regulatory Information
For the avoidance of doubt, please refer to the original English language version.
Gauge Dimensions: Instrument Length: 290mm (11.5")
Gauge Weight: 1.7kg (3.7lb)
The pressure gauge supplied with the Elcometer 508 Digital Push Off Adhesion Tester is intended for use
only as an integral part of the instrument and should not be removed by the user and used elsewhere.
A Material Safety Data Sheet for the adhesive supplied with the Elcometer 508 and available as an accessory,
can be downloaded via our website:
www.elcometer.com/images/MSDS/elcometer_mc1500_adhesive.pdf
© Elcometer Limited 2015. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
1
R
www.elcometer.com