Warranty Statement - Elcometer 508 Guia Del Usuario

10 SPARES & ACCESSORIES (continued)
10.4 DOLLY PLUGS
Each gauge is supplied complete with five dolly plugs. Additional
plugs are available to purchase separately. For information on when
and how to use dolly plugs, see Section 9 'Using a Dolly Plug' on
page 8.
Description
Dolly Plug, Pack of 5
10.5 DOLLY CUTTER
A dolly cutter is available which cuts through the coating to isolate the
coating area under the dolly. It should be noted that some coatings will
be damaged by such an operation, which may cause micro-cracks.
Use of a dolly cutter should be agreed before testing starts.
Description
Dolly Cutter
10.6 DOLLY TOOL
Supplied as standard with each gauge, the dolly tool is used to remove
excess adhesive from the centre of the dolly.
Description
Dolly Tool
10.7 HEATING TONGS
Supplied as standard with each gauge, heating tongs are used to
soften the adhesive and remove the dolly from the test surface, see
Section 8.2 'Cleaning the Dolly' on page 7.
Description
Heating Tongs; EU 220V / UK 240V
Heating Tongs; EU to UK Converter Plug
Heating Tongs; US 110V

11 WARRANTY STATEMENT

The Elcometer 508 is supplied with a 12 month warranty which
excludes contamination and wear. The warranty can be extended to
two years within 60 days of purchase via www.elcometer.com.
a
Supplied with T99923147.
13
R
Part Number
T99911136
Part Number
T99914009
Part Number
T9994586-
Part Number
T99923147
a
T99923102
T99923103
www.elcometer.com