Step 2: Device Operation - Sensica IPL030 Manual Del Usuario

Step 2: Device Operation

This device is equipped with a unique intelligent built-in skin-tone
sensor, located below the treatment window.
This unique safety feature is active continuously during the
treatment and will prevent a flash from occurring in areas where
your skin is too dark or too tanned, even if your general skin type
is lighter.
ON/OFF button and
1
energy level button
2 Trigger button
Status indicator:
• Lack of contact
3
• Non-allowed skin tone
• Device not usable
4 1-3 energy level display
5 Skin tone and contact sensor
6 Power supply socket
7 Treatment window
8 Lamp
Important: Do not use any
cream or gel while using the
device since it may prevent
normal operation.
1. Insert the Power Supply into
the base of the device.
2. Plug the Power Supply
into an electrical outlet.
12
6 1 4
2
The standby indicator will
illuminate blinking green.
3. Turn the device on. When
the device is turned on
it will be automatically
set to the lowest energy
level (1) and the energy
level display will show
a steady green light.
5
7
8
3