Leggett & Platt E-95MR Guía De Operación página 4

READ ADVISORY INFORMATION IN THE OWNERS MANUAL CAREFULLY BEFORE USING THIS
PRODUCT. THE POTENTIAL FOR ELECTRICAL SHOCK EXISTS IF ELECTRICAL COMPONENTS ARE
NOT INSTALLED OR OPERATED PROPERLY.
Press to adjust the base to the level
position. This button will also turn off
head up/down button
Press and hold to raise or lower the
head Massage buttons
Press and hold to increase or
decrease head massage intensity.
head Massage on/off button
Switches the head massage on or
off. When switched on, the massage
feature will automatically shut off
wave on/off button
Press—after the head and/or foot
massage have been activated— to
activate or deactivate the wave
wave speed buttons
Press and hold—after the head and/
or foot massage, and the wave system
have been activated—to increase or
decrease the wave speed.
REMOTE CONTROL REqUIRES FOUR (4) AAA SIzE BATTERIES. TO CONSERVE
BATTERY LIFE, THE TRANSMITTER TURNS OFF ALL FUNCTIONS WHEN ANY BUTTON
IS PRESSED FOR MORE THAN 50 SECONDS.
4
E-95MR Remote Control Operation Guide 99300791-d
e-95MR function
important information
fLat button
the massagers.
head section.
after 30 minutes.
vibration system.
tRansMission
indicatoR Light
Verifies a button is being pressed and
data is being sent to the base.
MR button
Press to adjust the base to position
programmed using the set button.
foot up/down button
Press and hold to raise or lower the
foot section.
set button
Press to capture any position or
function of the base as a programmed
position. Press the MR button to
adjust the base to the programmed
position.
To Program Set Position:
1. Set the head, foot, massage, and/
or wave to the desired position.
2. Press and release the set button.
3. Press and release the MR button.
foot Massage buttons
Press and hold to increase or
decrease foot massage intensity.
foot Massage on/off button
Switches the foot massage on or
off. When switched on, the massage
feature will automatically shut off
after 30 minutes.
note