Intended Use; Items Supplied - EINHELL GE-LM 36/4in1 Li Manual Del Usuario

30. Hex key (5mm)
31. Pressure plate
32. Pressure plate cover
33. Hex nut (M10 self-locking, left-hand thread)
34. Carabiner
35. Assembly screws
36. Protective sticker
37. String unit
38. Housing recess (motor unit)
39. Recess from fl ange
40. Retaining screws
41. String blade
42. Lugs
43. Flange
44. Gear axle
45. Blade guard cover
46. Chain wheel cover
47. Sprocket wheel
48. Chain tensioning bolt
49. Chain tensioning screw
50. Oil tank
51. Lock-off button
52. Pushlock button
53. Eyelet
54. Pressure spring
55. Wall holder
56. Battery capacity indicator
57. Battery capacity indicator button

2.2 Items supplied

Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
store where you made your purchase at the latest
within 5 work days after purchasing the article and
upon presentation of a valid bill of purchase.
•
Open the packaging and take out the
equipment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
present).
•
Check to see if all the items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, keep the packaging until the end
of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, plastic sheets and small parts. There is
a risk of choking and suff ocating!
Anl_GE_LM_36_4in1_Li_SPK7_USA.indb 23 Anl_GE_LM_36_4in1_Li_SPK7_USA.indb 23
EN
•
Motor unit (unit with tube)
•
Extension pipe
•
String trimmer / brush cutter module (unit with
connecting tube)
•
Telescoping pole chain saw module
•
Hedge trimmer module
•
Complete steady grip
•
Harness with safety release
•
Saw chain
•
Cutter rail
•
Cutter rail guard
•
Guard for hedge trimmer blade
•
Key for telescoping pole chain saw
•
Key for string trimmer / brush cutter
•
Hex key
•
Pressure plate
•
Pressure plate cover
•
Hex nut (M10 self-locking, left-hand thread)
•
Original operating instruction with safety
information

3. Intended use

The cordless multifunction tool can be used as a
cordless string trimmer / brush cutter, a cordless
telescoping pole chain saw or a cordless hedge
trimmer. The supplied mounting kits must always
be fi tted in combination with the motor unit.
Cordless string trimmer / brush cutter
Used as a cordless string trimmer (using the
string spool with string) the tool is designed for
cutting lawns, grassed areas and small weeds.
Used as a cordless brush cutter (using the cutting
blade) the tool is designed for cutting young trees,
strong weeds and light undergrowth.
It is not designed to be used for public facilities,
parks, sports centers, along roadways, or in
agriculture and forestry.
The operating instructions as supplied by the
manufacturer must be obeyed to ensure that the
tool is used properly.
Important! Due to the high risk of physical injury
to the user, the cordless string trimmer is not
allowed to be used to clean paths or to chop
up tree and hedge clippings. Similarly, the tool
must not be used to level out high areas such as
molehills.
For safety reasons, the cordless brush cutter
must not be used as a drive unit for other work
tools or toolkits of any kind.
- 23 -
29.09.2021 09:33:54 29.09.2021 09:33:54