Step 7
ow on mounting plate (1) to arrow on fan body inner housing
ush outer housing (2) up and twist clockwise approximately
r housing unit will set in mounting bracket. Secure with outer
ews (S2).
Line up arrows on mounting
plate and inner housing plate.
All manuals and user guides at all-guides.com
8
For blade assembly, position blade arms and blade (4) so that all screw
holes are aligned (as shown in figure below). Using blade screws (S4),
insert through blade and up into blade arms. Tighten securely.
Mounting Plate
9
Outer Housing
Screws (S2)
Install glass (3) to fan by raising glass to fan and turning glass clockwise
until firmly seated.
Outer Housing (2)
Step 8
Blade (#4)
Blade Screws (S4)
Step 9
Glass (3)