Tabla de contenido
Idiomas disponibles
Idiomas disponibles
tion
tant: When using an existing outlet box, be sure the box is securely attached
building structure and can support the full weight of the fan. Failure to do
result in serious injury or death.
Step 1
circuit breakers and wall switch to the fan
ne leads.
ning: Failure to disconnect power supply prior to
lation may result in serious injury or death.To reduce
sk of shock, this fan must be installed with an
ing wall control/switch.
Step 2
make sure blades are at
rom any obstruction.
wnrod length to
des are at least
he floor.
(2.1m)
Min.
Step 3
uring mounting bracket, screw "J" hook (S7) into ceiling outlet
ondary support means. Secure mounting plate (1) using screws
s (S2) directly to the outlet box. Arrows on mounting plate and
ner housing plate will line up (see step 6). Be sure to position
ounting plate in the direction that the cowling on the fan body
. If not mounting to an outlet box, use wood screws (S1) and
rely to a beam or joist.
mount directly to sheet rock or ceiling tile.
ok installation is a Canadian requirement only.
All manuals and user guides at all-guides.com
30"
0.75m
Min.
84"
3
Step 3 Continued
"J" Hook (S7)
Ceiling
OUTLET BOX
Screws & Washers
for Mounting Plate (S2)
4
Hang the fan motor/outer housing (2) onto the hook that is positioned on
the mounting plate (1).
Cowling
Support Beam
Mounting Plate (1)
Wood Screws
& Washers (S1)
Step 4
Mounting Plate
Fan Motor
Outer Housing (2)
Tabla de contenido
