Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Modello - Modèle - Model
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
16. NOTES AND WARNINGS
L'apparecchio descritto in questo manuale è conforme alla direttiva macchine 2006/42/CE. Il contenuto di questo manuale è di natura
tecnica e di proprietà di EPTA s.p.a. è vietato riprodurre, divulgare o modificare interamente o parzialmente il suo contenuto senza
autorizzazione scritta. La società proprietaria tutela i propri diritti a noma di legge.
Leggete attentamente il manuale e rispettate i contenuti prima di installare ed utilizzare l'apparecchio.
The company cannot be held in any way liable for any damage to people, animals or the product conserved in the event of:
•
Improper use of the equipment or use by unsuitable or unauthorised staff.
•
Incorrect installation or power supply not suitable for the appliance.
•
Non-compliance with this manual.
•
Non-compliance with the maintenance program.
•
Unauthorized modifications to the appliance.
•
Installation of non-original spare parts on equipment.
•
Installation and use of the equipment for aims differing from those specified in this manual.
•
Tampering with or damage to the power supply cable.
Responsibility for application of the safety provisions outlined below is the responsibility of the technical staff responsible for the
activities planned on the equipment, who must ensure the authorised staff:
•
Are qualified to perform the task requested
•
Know and strictly comply with the provisions contained in this document
•
Know and apply the general safety standards applicable to the equipment.
Tampering with or unauthorised replacement of one or more parts of the equipment, use of accessories
that change its use and use of spare parts differing from those recommended can cause risks of accidents.
Any intervention on the equipment strictly requires disconnection of the power socket and however no
guard (grids, casings) should be removed by unqualified staff; strictly avoid operating the freezer with
these guards removed.
17. EQUIPMENT IDENTIFICATION
•
Located on the plate affixed to the machine to detect the technical data.
•
Check the model and power supply voltage before carrying out any operation.
•
If discrepancies are found, immediately contact the manufacturer or the company that supplied the equipment.
1.
Manufacturer
2.
Code
3.
Conformity marking
4.
Power supply voltage (V)
5.
Power supply frequency (Hz)
6.
Absorbed electrical power (W)
7.
Absorbed electrical power in defrosting (W)
8.
Light max. power (W)
9.
Gross volume
10. Type and quantity of refrigerant
11. Climate class
It is strictly forbidden to remove, tamper with the plate and change or alter the
data contained in it.
18. ENERGY SAVING TIPS
•
Install the appliance in a dry, well-ventilated room away from heat sources (radiator, cooking surface and so on) and in a position
out of direct sunlight.
•
Follow the installation instructions to ensure adequate ventilation. Insufficient ventilation to the back of the appliance causes an
increase in energy consumption and reduces cooling efficiency.
•
The internal temperature of the appliance depends on the room temperature, how often the doors are opened and where the
appliance is placed. These factors have to be taken into account when setting the thermostat. Only open the doors when strictly
necessary.
•
Let hot food and drink cool down before placing them in the appliance.
•
The positioning of the shelves in the fridge has no effect on energy efficiency.
•
The fridge compartment light system uses a LED light, which at the same time ensures more efficient lighting and reduced energy
consumption.
F300 - F400 - F500
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
1
6
4
5
7
8
9
3
1 6 / 4 8
PAGE
N° DOC
2
10
11
*Example of data plates
11
Tabla de contenido
