Connecting The Head Support Motor; Attachment Of The Handset; Position Of The Legs - Auping K2 Manual De Instrucciones

All manuals and user guides at all-guides.com
4. Insert the plug of the back motor into the
control box at the connection point on the
side (connection point 4).
5. Insert the plug of the upper leg motor into
the control box at connection point 1.
6. Insert the plug of the remote control into
the control box at connection point 2.
7. Insert the plug of the head support into the
control box at connection point 3.
8. Secure the cords underneath the pull relief
on the control box.
9. Insert the plug of the control box into the
wall socket.

3.3 Connecting the head support motor

Connect the coiled flexible cable of the pre-
mounted head support motor to the side of
the electric motor for the back section and
foot end. Lead the cable over the cross bar of
the adjusting mechanism of the back section,
giving the cable enough play to follow the
movement of the back section.

3.4 Attachment of the handset

• In order to easily attach
the handset
Auping Auronde
Next or other
model.
• Place the clamp on the
underside of the side
panel of the surround
(see fig. 4).
• Click the handset into
the clamp.
_006IH_3114 BW.pdf - pag.15
to the
and
bed
LET OP !!! Lage resolutie!

3.5 Position of the legs

Correct placement of the legs is essential for
a correct weight distribution. This means that
the legs must be placed at the distances from
head and foot end of the bed as indicated in
the following illustration (bed seen from
above):
Lengte 190/200 cm: HE 20 cm VE 25 cm
Lengte 210/220 cm: HE 30 cm VE 25 cm
fig. 4
Hoofdeind (HE)
Voeteneind (VE)
GB15
November 9, 2007