Technical Specifications; Safety Instructions - Auping K2 Manual De Instrucciones

All manuals and user guides at all-guides.com

1.3 Technical specifications

Drive motor (per motor)
- Input 230 V~ (depending on the model
input 220/240/110 V~) 50/60 Hz 145 W.
- motor 24 V, 75 W.
Maximum continuous operating time:
2 minutes per 20 minutes.
Handset
- Coiled flexible cable 24 V.
- Push buttons to adjust the head support,
back section and foot end of the mesh
base.
Weight (example)
- K2 type 88, dimensions 90 x 200: 37 KG.
Head support motor
- DC motor 24V.
_006IH_3114 BW.pdf - pag.13

2. Safety instructions

■ The K2 mesh base must only be fitted and
connected to the electricity supply by an
Auping specialist.
■ The K2 mesh base is only suitable for use
in the home.
■ The electrical mesh base has a power-off
switch which switches off the electricity
supply from the mains when no power is
demanded. The power-off switch is in the
plug. When you press one of the control
buttons, the power-off switch automatically
turns the power on. The green light on the
plug indicates that power is being used.
■ The K2 mesh base operates on 24 V low-
voltage current.
■ Check that the voltage of the transformer is
the same as the mains voltage in the house.
■ Adjustable beds have moving parts. Make
sure that your limbs cannot become trapped.
■ Only adjust the bed while you are lying on it.
Make sure that no children are under the
bed while it is being adjusted.
■ The mesh base is not a toy. Do not allow
children to play with the bed.
■ Do not use the bed as a trampoline or
stepladder.
■ Disconnect the bed from the power supply
before cleaning. Pull the plug out of the
socket.
■ The K2 mesh base is not intended for use
by persons with a psychological complaint
or mental deficiency or children, unless
they have been properly instructed how to
use it and are aware of the risks.
LET OP !!! Lage resolutie!
GB13
November 9, 2007