De Dietrich FM161 Instrucciones De Utilizacion página 11

1. Description
1.2 Display
b
1 2
a
0 2 4 6
8806N019A
g
a
The graphic bar displays the heating programme for the displayed
circuit for the current day:
b Light area: indicates a "reduced" heating period or a "calorifier
heating not allowed" period.
c
Dark area: indicates "comfort" heating period or a "calorifier heating
allowed" period.
d
Flashing cursor showing the current time
e
Arrow indicating the current day (1 = Monday)
f
Number display (current time, adjusted values, parameters, etc.)
2 Time and day setting
Press the key using a pen and adjust the time and the day using
the + and - keys.
- Press once to make a minute by minute setting.
- Press again for hour by hour setting.
3 Heating temperature setting
1 2
0 2 4 6 8
C
- Select the comfort temperature
or the antifreeze temperature
corresponding set temperature appears to the left of the display.
- Set the desired temperature using + or -.
The bar graph displays the heating programme for the current
day.
The room temperature measured is shown in the zone to the
right of the display.
11
d c
e
3 4 5 6 7
8 10 12 14 16 18 20 22 24
h j k g i
3 4 5 6 7
+
10 12 14 16 18 20 22 24
C
-
or the reduced temperature
by pressing the key; the
g
Arrow positioned under the active operating mode symbol
h
Summer mode: This mode is not adjustable using CDR2 remote
control but using the DIEMATIC 3 control panel.
i Circuit operation symbols:
f : Status of the 3-way valve for the displayed circuit (If the CDR2
remote control is connected to the optional equipment)
Open
Close
: Circuit circulating pump ON
j
Boiler maintenaince to be scheduled
k Steady symbol: DHW available or production underway
Flashing symbol: DHW temperature insufficient, press key
if need be.
The normal display reappears 2 minutes after making the
setting, or when you press key AUTO.
- Press a third time for day by day setting by putting the arrow
the graphic bar from 1 to 7 (1 = Monday).
Keeping the + or - keys pressed speeds up the scrolling.
A fine setting can be made with short presses.
FM161 - FM162
in
17/03/08 - 300009548-001-B