Kling-Net Mode; Cleaning And Maintenance; Technical Specifications - HQ-Power VDPLBPX Manual Del Usuario

To set the device to work with a DMX controller:
1. Press MENU until <DMX CH Mode> is displayed and press ENTER.
2. Use UP and DOWN to select a channel mode and press ENTER.
3. Press MODE until <DMX Address> is displayed and press ENTER.
4. Use <UP> and <DOWN> to set the DMX start address and press ENTER.
Start addresses
Use the table below to define the correct address. The table shows the settings for units 1 to 3. Apply the
same principle for the other units. Example:
Channel mode
8 start address
channel
7.7

Kling-Net Mode

At power-up, the VDPLBPX is detected and configured automatically by Kling-Net. Refer to your Kling-Net
LEDMaster software manual for more information.
8.

Cleaning and Maintenance


All screws should be tightened and free of corrosion.

The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections...

Mechanically moving parts must not show any signs of wear and tear.

The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.

Disconnect the device from the mains prior to maintenance activities. Let the device cool down.

Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.

Do not immerse the device in any liquid.

There are no user-serviceable parts.

Contact your dealer for spare parts if necessary.
9.

Technical Specifications

power supply
controller
power consumption
DMX connector
LED source
IP rate
dimensions
controller
LED ball string
weight
controller
LED ball string
options
VDPLBPXS
Use this device with original accessories only. Velleman nv cannot be held responsible in the
event of damage or injury resulting from (incorrect) use of this device. For more info
concerning this product and the latest version of this manual, please visit our website
www.hqpower.eu. The information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part
of this manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise
without the prior written consent of the copyright holder.
V. 02 – 30/06/2015
VDPLBPX
First unit Second unit
1 9 (1 + 8)
1 - 8 9 - 16
100-240 VAC, 50/60 Hz
43 W
3-pin XLR
2 x SMD5050 each ball
IP20
1000 x 82 x 65 mm
1000 mm (length)
2.2 kg
230 g
set of 10 LED ball strings
Third unit
17 (9 + 8)
17 - 24
10
Highest start address
505
©Velleman nv