Control Panel; Stand-Alone Mode; Master/Slave Mode - HQ-Power VDPLOW1210RGBW Manual Del Usuario

7.1

Control Panel

Access the control panel functions using the four panel buttons located around the display:
Button Function

MENU


ENTER


UP


DOWN

Menu
menu
4-CH
6-CH
10CH
48CH
53CH
C--
P--
S--
U--
dIM
teMP
PASS
7.2

Stand-Alone Mode

The device starts running in stand-alone mode after connection to the mains. This mode allows you to
use the device without controller.
1. Connect the device to the mains to switch it on.
2. Press MENU to enter the menu.
3. Navigate to <C--> or <P--> with UP or DOWN and press ENTER to confirm.
4. Select an option with UP or DOWN and press ENTER to confirm.
7.3

Master/Slave Mode

Notes

The master/slave mode allows for connecting several devices to a single master device in a daisy chain.

All slave devices will then work synchronously with the master device.

Configure all slave units before connecting the master unit to the daisy chain.

The maximum number of slave units you can connect to a master unit is 18.
Slave units
1. Connect the DMX input from your slave device to the DMX output of the previous device in the chain.
2. Connect the slave device to the mains to switch it on.
3. Repeat these steps for all slave units.
V. 01 – 27/10/2014
VDPLOW1210RGBW
access the menu
return to a previous menu option
select menu option
store the current menu or option within the menu
scroll through the menu options in ascending order
increase value
scroll through the menu options in descending order
decrease value
function
DMX channel mode
static colour
auto programme
speed setting
colour setting mode
dimmer mode
device temperature
password
selection of the DMX channel mode
static colour selection
(1:R, 2:G, 3:B, 4:W, 5: GB, 6:RB,
7:RG, 8:RGB, 9:RW, 10:GW, 11:BW,
12:RGW, 13:RBW, 14:GBW, 15:RGBW)
selection of the auto programme with
LED and motor speed setting
P0: running P1-P12
P13: fade
from slow to fast
dimmer speed selection from fast
(0.8 s) to middle (1.6 s) to slow (2.4 s)
to unlock, press UP-DOWN-UP-DOWN-
ENTER
6
description
©Velleman nv