About The Power Source; Charging Time; Precautions When Charging; Charging Procedure - Honda CV7285Z Manual Del Propietário

ABOUT THE POWER SOURCE

Model
For North America
For Europe and Switzerland
For United Kingdom
For Japan

CHARGING TIME

Charging time from zero to full charge: about 1.5 hours
• Charging may take longer when a Battery Pack is charged
immediately after being used in a specified device. This is
because the Battery Pack needs to be cooled before it can
charge.
• Charging time for a low-temperature Battery Pack is
shorter because its capacity to charge is smaller. When
this happens, the time the Battery Pack can be used is also
shorter.

PRECAUTIONS WHEN CHARGING

• When charging, keep the Battery Charger at least 50 mm
away from a wall.
• When you plug the AC plug into the electric outlet, be sure
to plug it all the way in.
• The Battery Charger and AC cable become warm during
charging, but this is not abnormal.
• Charging stops during a power outage.

CHARGING PROCEDURE

Check Before Charging
• No foreign material is in the intake/exhaust port of the
Battery Charger and the Battery Pack.
• Charging cable, AC cable and Battery Pack to be charged
are not damaged.
• There is no dirt or foreign matter in the charging connector
or the battery connector.
Procedure to Start Charging
See figure 3 on page IV.
1. Place the Battery Charger in a level and stable location.
2. Plug the AC plug into an electric outlet.
The Battery Charger's POWER indicator lights.
3. Place the Battery Pack in the recess in the center of the
Battery Charger.
If the Battery Pack is not positioned correctly, the Battery
Pack cannot be cooled while it charges, so charging may be
stopped by the high-temperature protection function.
4. Connect the charging connector to the battery connector.
All the indicators on the Battery Charger and the Battery
Pack light for about one second.
After that, just the Battery Charger's POWER indicator lights,
and charging starts automatically.
The charge level indicator on the Battery Pack lights or
flashes according to the state of the charge.
Power Source
AC 120V
AC 230V
AC 240V
AC 100V
Indicator Display
Fully charged.
High
Low
Charging has stopped.
: On, : Flashing, : Off
Procedure After Charging
When the Battery Pack is fully charged, charging stops
automatically and the charge level indicator on the Battery
Pack turns off.
1. Remove the charging connector from the battery
connector.
When removing the charging connector, grab the charging
connector and pull it out. Do not pull by the charging cable.
2. Unplug the AC plug from the electric outlet.
3. Put the charging connector and AC plug back in their
holders.
Procedure to Stop Charging
You can also stop charging and remove the Battery Pack
before it is fully charged.
1. Remove the charging connector from the battery
connector.
When removing the charging connector, grab the charging
connector and pull it out. Do not pull by the charging cable.
2. Unplug the AC plug from the electric outlet.
3. Put the charging connector and AC plug back in their
holders.

TRANSPORTING

Before transporting the Battery Charger, remove the Battery
Pack from the Battery Charger.

CLEANING

• Before cleaning, always unplug the AC plug from the
electric outlet.
• Use a soft dry cloth.

STORAGE

Before storing the Battery Charger, remove the Battery Pack
from the Battery Charger, and unplug the AC plug from the
electric outlet.
Charge Level
Charging.
3