Hardware Installation - Stardom SOHORAID SR4 Serie Manual De Usuario

9. It is highly recommended for users to back up important data contained within the SR4-
WBS2 unit on a regular basis or whenever the user feels necessary to a remote or a
separate storage device. Stardom will not be responsible for any lost of data caused
during the use of the unit or the recovery of the data lost.

4. Hardware Installation

Please follow the instructions below to complete the hardware installation:
Step 1 Open the package and take out the product making sure that all the enclosed contents
are not damaged or missing. If there are damages or missing contents, please contact
your supplier immediately.
Step 2 Place the device on a stable surface, ensure that it is well ventilated without blockage
to the vent and kept away from locations near moisture or where the product may
become vulnerable resulting in damages.
Step 3 Choose the storage mode of your choice through the storage mode switch located
at the rear of the unit.
Step 4 Use the provided key in the accessory kit and insert it into the key access opening
to eject the removable drive tray latch and extract the removable drive tray.
Step 5 Remove the drive stabilizer from the removable tray. Mount the hard drive onto the
tray and secure it with the screws provided in the accessory kit. Once completed,
insert the drive tray back to the drive position A and push the latch into place.
Repeat the same procedure for drive position B, C, and D in sequence to complete
all drive installations.
Step 6 Choose the corresponding cable to connect the preferred interface connection on
the back of the SR4-WBS2 to the computer.
All manuals and user guides at all-guides.com
SOHORAID SR4 Series User Manual
English
Deutsch
Français
Español
中文
日本語
한국어
5