Set Flash Time; Setting The Display Contrast - Topcom T41 Manual De Usuario

• Press the - button. 'SET 1 DATE' is displayed.
• Press repeatedly the
displayed
• Press the - button to confirm.
• Use the - button or the
or "_" to unselect)
• Press the - button to confirm the first digit and change to the next digit
• Repeat the previous steps for the digits (max. 5 digits). When no local prefix is
used set, LCD displays: 'ACODE _ _ _ _ _'
• After confirming the last digit, you will go to the next setting.
9.4

Set flash time

You can set the flash time of T41 as different time: 110ms, 300ms, 600ms and 1000ms.
• Press the - button, "SET 1 DATE" is displayed.
• Press repeatedly the
displayed
• Press the - button, the LCD shows: "FLASH 3 110" (110 is the flashtime).
• Press the - button or the
• Press the - button to confirm your selection and to go to next item setting
9.5

Setting the display contrast

You can select the desired contrast as follows:
• Press the - button, "SET 1 DATE" is displayed.
• Press repeatedly the
displayed.
• Press the - button again to enter LCD contrast setting mode
• Use the - button or the
• Press the - button to confirm your selection and go to next setting item
The display contrast can also be changed by pressing the '
standby.
Topcom T41
All manuals and user guides at all-guides.com
- button or the
- button to select the first digit of the local code (0~9
- button or the
- button to select your desired flash time
- button or the
- button to select the desired display contrast
- button until 'SET 2 ACODE' is
- button until "SET 3 FLASH" is
- button until "SET 4 LCD" is
Topcom T41
' repeathely in
7