Product Features - KIKKA BOO MONACO Instrucciones De Uso

4.2. Installation of rear wheel: Place rear wheel on the two legs of the back end of the cart frame. Pull the rear wheel after installation to check whether the
wheel is tightened with cart frame, and make sure the wheel is installed on a 10 mm around shaft. Make sure the rear axle xed lock is gapless and locked.
4.3. Installation of handlebar: Push down the handlebar and clutch button to complete the combination of the clutch button (front wheel must be towards the
front direction). You can refer to completed installation picture with a dashed frame.
REMOVE: It's the same way to remove handlebar or front wheel from cart frame. The release lever is in the middle of the front wheel mudguard bottom. Pull the
front end of the lever by one hand and remove the handlebar form front wheel.
4.4. Installation of seat: Combinene the seat pipe and seal. See lhe red button under the seat is on the opposite direcfun of cart frame, and then assemble lhem
together. Insert screw into the bottom of seat pipe. Tighten screw by attached tool clockwise (torque 15N"M).
4.5. Installation of bag: Assemble the bag on handlebar. Wrap the bags top Velcro with the plastic part of auxiliary handle and place the lower Velcro around two
circular tube of auxiliary handle. Keep bag on the opposite direction of walking. '
4.6. Installation of front handrail: The front handrail is settled on both sides of seat mat and back support. Make sure the red hook is xed on both sides of seat
mat and back support after the installation. You can pull the red xed hook to assemble or remove the front handrail.
4.7. Installation of sunshade canopy: Put sunshade canopy into the xed hole and make sure the jumping ball also jumps out at the side of xed hole.
4.8. Installation of rear basket: The rear basket is located at the rear axle on both sides of the exposed parts. "Click" will be heard when you push it to the correct
place. Pull the rear basket rst backwards and then downwards, so that let the xed hole on rear basket enters into the frame hook.
4.9. Installation of auxiliary handlebar: Take out screws and bolts from auxiliary handlebar sets. Place auxiliary handlebar behind cart seat and keep it with the
rear short tube in the same line. Put the red xed wrench towards the back. Insert the screw of auxiliary handlebar into xed hole and tighten the bolt clockwise
(torque 5N'M). Pull up the red xed wrench of auxiliary handlebar to x it.
4.10. lnstallation of rear fabric basket: Hang the lanyard at the top of basket with the hanging ring at the back of auxiliary handlebar.
4.11. Installation of small child footrest: Insert the small child footrest into the bottom of cart frame. lighten the bolt clockwise in either left side or right side
depending on your idea. The small child footrest is foldable.
4.12. Installation of infant footrest: First, you need to distinguish between left side and right side of the infant footrest. Insert the infant footrest into the small
groove at the bottom of the seat and push it hard till the xed button come outside the xed hole.

5. PRODUCT FEATURES

5. 1. Rotating seat: Pull down the red button on the back of the rotating seat. Tum the seat 180 degrees, and then there will be a "click sound that means the seat
is in place.
5. 2. Linage of handlebar and front wheel: You can use the clutch function by pushing down or puuing up the clutch button at the bottom of handlebar. Child
won't be disturbed by the auxiliary handlebar which controlled by parents when using the clutch function.
5. 3. Pedal clutch: Pedal clutch function can make the pedal don't move with the rotating front wheel when you turning it. The pedal clutch switch located at the
central of front wheel.
5.4. Removable back support: Back support is removable. Turn the seat 90 degrees steadily and remove the screw with the attached tool.
5.5. Angle adjustable back support: The back support can be adjusted in two angles. Press the buttons at the two sides between seat and back support to make it
up right or lay down.
5.6. Opening/ closings secure portection: The front handrail is very easy to open or dose, which can help you easily pick up your child. You can open or close the
front handrail by press the button forward or backward in the middle of front handrail. The Shoulder belt and crotch belt can make child more comfortable when
seating in the cart.
5. 7. Angle/length adjustable auxiliary handlebar: In order to better meet the needs of users, the angle and the length of the handlebar was designed to 3 levels
which you can adjust angle/length respectively. The angle adjusting button is located on the top of auxiliary handlebar and the length adjusting button is on the
bottom.
5.8. Brake: Step on the foot brake to stop the tricycle. Remove your foot to release the brake. Don't step on brake during regular walking, otherwise damage may
occur to the brake.
5.9. Secure cover of fabric basket: The safety cover is attached with the auxiliary handlebar. It is mounted on the steering rod at the back of the frame and the
safety cover has a U slot at the top of safety cover which you can hang the Lanyard of fabric basket over there.
5.10. lndependent bag: The bag has a shoulder belt inside. It assembled by the Velcro and shoulder belt, so it also can be used as an independent carry bag.
5.11.Window: There is a window on the top of the sunshade canopy. You can x the cover by the xed rope on top of the sunshade.
5.12.Two sides seat mat: You can remove the seat mat after you take away the seat belt. The seat mat is designed to be reversal.
6. MAINTENANCE:
1. Exposure to direct sunlight will cause discoloration or colour fading. Please keep the tricycle in a cool room if not in use. 2.Please keep the tricycle away from
water and damp. 3. Don't wipe the cart with wet cloth; this can cause the trike to lose its lustre and sheen.4. Please throw away all packaging materials and
protective materials after unpacking. 5. Check if all fastening parts are tighten before each use. If not checked, you risk your child to be hurt! 6. It's dangerous if all
parts are not installed correctly! 7. Avoid prolonged wet, cold or high-temperature environment of the use or storage. 8. Avoid crashing another hard objects and
obstacles. 9. The toy should be used with caution becaus some skills are required to avoid falls or collisions that may cause injury of the users or third parties 10.
Only adults must install the product.
ENGLISH