Troubleshooting - Bestway 58156 Manual Del Propietário

Storage and Winterization
CAUTION: YOU MUST UNPLUG THE POOL HEATER AND THE FILTER PUMP BEFORE MAINTENANCE BEGINS OR SEVERE RISK OF
INJURY OR DEATH EXISTS.
To avoid damage, pool equipment must be winterized when temperatures decrease. Allowing water to freeze will damage the Pool Heater and void
the warranty.
The heater shall not be left out in the open air for long periods of time. When it is not in used, please store it in a cool, dry place once it has been
cleaned and dried.
1. Follow the instructions previously outline to stop water flowing to the Filter Pump and the Pool Heater.
2. Detach all hoses.
3. Drain any water in the Pool Heater and clean all components thoroughly.
4. Put the Pool Heater in a cool, dry place, out of children's reach.

Troubleshooting

Bestway strives to provide the most trouble-free Pool Heaters on the market. If you experience any problem whatsoever, do not hesitate to contact
us or your authorized dealer.
Problem
1. The heating light does
not work.
2. Pool Heater not
heating properly
3. Inlet and Outlet Valves
leak
4. Water does not flow
5. The heating light turns
off but the Pool Heater
heats
Disposal
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facilities.
Contact your local government for information regarding the collection systems available.
If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain,
damaging your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old appliance for disposals at least free of charge.
All manuals and user guides at all-guides.com
Cause
A. Power failure
B. RCD plug tripped if equipped
C. Filter Pump does not work
A. The Pool Heater is not working
B. Heating time is too long
C. Filter pump does not match the Pool Heater
appropriately or Filter Pump failed, resulting in high
or low water flow rates.
D. Pool Heater failed
A. Hose Clamps are loose
B. Hose O-ring not in correct position
C. Hose Broken
Filter Pump broken
A. The light is broken
B. The switch is broken
A. Check power source
B. Reset RCD plug
C. Check whether the water is flowing
A. Check the heating light to see whether the heater
is working
B. Highly recommend the use of a Bestway pool
cover
C. Filter Pump needs to be replaced or repaired.
D. Contact after-sales service
A. Tightened hose clamps
B. Check whether O-Ring are damaged.
C. Check if hoses are broken
Check and repair the Filter Pump according to the
relevant instructions in the Filter Pump's owner's
manual
A. The heating light is wrong and the heater still
works.
B. The switch is not working and you should contact
after-sales for service.
6
Solution
Bestway
®
S-S-000833