At The End Of The Programme - AEG L98690FL Manual De Instrucciones

22
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1. Touch button
flashes.
2. Touch button
ing programme continues.
CANCEL A PROGRAMME
1. Press button
gramme and to deactivate the ap-
pliance.
2. Press button
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Touch button
flashes.

AT THE END OF THE PROGRAMME

1. The appliance stops automatically.
2. The acoustic signals operate, if it is
active.
3. In the display
message tells you that the pro-
gramme is completed.
4. The indicator of button
off.
5. The door lock symbol goes off.
6. Press button
appliance. After five minutes from
the end of the programme, the AU-
All manuals and user guides at all-guides.com
6 . The indicator
again. The wash-
6
1 to cancel the pro-
1 again to activate
6 . The indicator
goes on and the
6 goes
1 to deactivate the
2. Change the function set.
3. Touch button
6
ing programme continues.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Touch button
6
symbol in the display goes off and
a message tells you that the door is
unlocked.
2. Open the appliance door.
3. Close the appliance door and
touch button
6
gramme or the delay start contin-
ues.
If the temperature and the level
of the water is too high, the
door lock symbol stays on. You
cannot open the door. If neces-
sary, do the following procedure
to open the door:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is
in the drum.
If you deactivate the appliance,
it is necessary to set the pro-
gramme again.
TO OFF function automatically de-
activates the appliance.
When you activate the appli-
ance again, the display shows
the end of the last set pro-
gramme. Turn the programme
knob to set a new cycle.
7. Remove the laundry from the appli-
ance. Make sure that the drum is
empty.
8. Keep the door ajar, to prevent mil-
dew and odours.
9. Close the water tap.
again. The wash-
. The door lock
again. The pro-