Care and Cleaning
Disconnect the power supply before cleaning and maintenance.
●
●
Do not splash water on the units for cleaning, as electric shocks may occur.
Wipe the units with a dry soft cloth, or a cloth slightly moistened with water or cleaner (not with
●
volatile liquid such as thinner or gasoline).
Dip a piece of cloth into the water colder than 45
Remove the front panel.
the dirty part of front panel.
Note: Do not immerse the front panel into water so as to protect
diagram on the front panel.
Cleaning the Air Filter (every 3 months)
Note:
Do not touch
the fin of indoor unit during cleaning to avoid personal injury.
Take down the air filter
①
Lift up the front panel.
Pull the air filter downwards to take it off,
as shown in Fig.(a,b).
Clean the air filter
②
Use a vacuum cleaner to remove dust.
If the filters are dirty, wash them with warm water
and mild detergent.
Dry the filters in the shade.
Note: Never use water above 45
filter as it may cause deformation or discoloration.
Reinstall the
air filter
③
Reinstall the filters along the direction of arrowhead.
Close the panel.
All manuals and user guides at all-guides.com
Caution
Cleaning the Front Panel
to clean the air
℃
- 13 -
and dry it. Then wipe
℃
microprocessor
components and circuit
(
a)
(
b )