Operation Of Wireless Remote Control - Daitsu DS-18UIAK Manual Del Usuario

Operation of wireless remote control

Names and functions of wireless remote control
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
Remote control
X-FAN
X-FAN button
● PressingX-FAN button in COOL or DRY
mode,the icon
indoor fan will continue operation for
10 minute in order to dry the indoor unit
even though you have turned off the unit.
After energization, X-FAN OFF is defaulted.
X-FAN is not available in AUTO,FAN or
HEAT mode.
Note： X-FAN is the alternative expression
of BLOW for the purpose of understanding.
TURBO
TURBO button
● In Cool or Heat mode, press this button
can turn on or turn off the Turbo function.
After turned on the Turbo function, its
signal will be displayed. When switching
the mode or changing fan speed, this
function will be canceled automatically.
All manuals and user guides at all-guides.com
is displayed and the
8
+
+ button
For presetting temperature increasing.
●
Press this button,can set up the temperature,
when unit is on. Continuously press and
hold this button for more than 2 seconds,
the corresponding contents will be
changed rapidly, until unpress the button
then send the information,
laying all along. In Auto mode, the temp-
erature can not be set up, but operate this
button can send the signal. Centigrade
setting range :16-30; Fahrenheit scale
setting range 61-86.
-
- button
● Presetting temperature can be decreased.
Press this button, the temperature can be
set up, continuously press this button
and hold for two seconds, the relative
contents can quickly change, until unhold
this button and send the order that the ℃
o
( F) signal will be displayed all the time.
The temperature adjustment is unav-
ailable under the Auto mode, but the order
can be sent by if pressing this button.
LIGHT
LIGHT button
● Press this button at unit On or Off status,
Light On and Light Off can be set up.
After powered on, Light On is defaulted.
is disp-
℃（℉）