: For modification time function - Press this button, the 'SUN' on the LED
screen starts to twinkle. Press up
press
button to select, press
press
button switch to the 'hour' position. Press
hour. Press
desired minute. Press
NOTE: The date will be reset after power interrupt.
: For automatic working time setting function - There are 10 time
periods you can set to make the unit work automatically. Press this button,
time serial number starts to twinkle. The 'ON' on the LED screen lights up.
Press
or
button to the desired serial number. Press
'SUN' on the LED screen starts to twinkle. Press up
the desired date, and press
set the desired date, press
button to the desired hour. Press
Press
or
button to the desired minute. At this time you have completed
the boot time setting. Press
'OFF' lights up. Complete the shutdown time in the same way. Finally, you need
to set a temperature which stop heating. Press
temperature. When desired ambient temperature is reached, the heater will
automatically stop heating.
: For Window detection function - Press this button to turn on the
window detection function. During the heating process, if the room temperature
drops obviously caused by the outdoor cold air blowing, such like open windows
or open the door. In order to save energy, the heater will automatically stop
heating. The corresponding icon on the screen will twinkle. Press again to turn
off the window detection function to normally heating.
: For reset function - Press this button to clear the Timing parameters.
: For heat function - Press this button to turn on the heat function.
Press again to turn off.
: For timer function - Press this button to turn on the timer function.
Press again to turn off.
button switch to the 'minute' position. Press
or
button to select, press
button switch to the 'hour' position. Press
or down
button to cancel. After set the desired date,
button to complet date setting.
button switch to the 'minute' position.
button again, the 'ON' extinguished and the
button to the desired date, and
or
button to the desired
or
button again, the
or down
button to cancel. After
or
button to the desired
button to the
button to
or