CRC SmartWasher SW-23 Manual De Instrucciones página 17

7.1.3. Model SW-28
1. Remove the OzzyMat
lay it on the mat support grid located in the lowest
level in the sink. Make sure to lay the OzzyMat
side up.
2. Place the false bottom in position in the sink.
3. Form the flexible nozzle to its desired shape and be
sure that the parts brush is inside the sink
4. DO NOT PLUG UNIT IN BEFORE ADDING
OZZY JUICE
®
5. At start up, carefully add ± 95 liter of OzzyJuice
to the SmartWasher
directly into the sink.
6. Plug the unit into a 220 VAC GFCI electrical outlet
7. The SmartWasher
®
to heat up to its selected optimal temperature of
40°C (± 1°) or 46°C (± 1°). This temperature will be
maintained as long as the SmartWasher
in and full of OzzyJuice
the heater automatically shuts off.
SmartWasher
BIOREMEDIATING parts washing system
USER INSTRUCTION MANUAL
from its package, unfold it and
®
by slowly pouring the solution
®
will take approximately four hours
®
. If the "Add Fluid" light is on,
®
ORIGINAL INSTRUCTIONS
white
®
33075
Drain Basket 3 1/2"
Stainless steel
®
is plugged
®
33062
False Bottom With
Drain For Sink
32950
Multi-Layer
OzzyMat FL-4
33076
Mat Support Grid
page 17 of 720