REMOVABLE WATER TANK
When the water tank is full with approximately 2.2 gallons (18 pints) of water, the unit will
automatically shut off and the "FULL" indicator will be lit.
Empty the water tank manually:
To remove the water tank, turn the dehumidifier off by pressing the "On/Off" button. Remove
the water tank from the unit and pour the water out in a toilet or sink. Place the water tank back
into the unit. To continue dehumidifying, press the "On/Off" button to again.
Continuous Drainage:
The housing of the bucket has a threaded
hose connection which can be modified for
continuous drainage. Drill a 1/4" (6.4mm) -
1/2" (13mm) hole in the center of the hose
connection. Attach a garden hose (make
sure the hose is not bent and has no kinks)
to the threaded bucket drain hose
connection. Water will then continuously
drain through the hose to a drain lower than the level of the hose connection.
MAINTENANCE
To clean the unit, turn the dehumidifier off and unplug it from the outlet. Use a dry soft cloth to
clean the surface grills.
The air filter should be checked and cleaned at least every 2 weeks. Remove the air filter located
on the back of the unit by slightly pressing the two tabs and pull out.
Wash the air filter with warm water and let it dry. Once the filter is dry you can place it back in the unit.
After removing the air filter, clean the
coil on the inside with a soft brush to
remove any soft and wet soil. Do not
spay cleaner or allow water to enter
the machine.
All manuals and user guides at all-guides.com
5
RDH-065EA, RDH-045EA