Sony HT-SS370 Guía De Instalación Rápida página 60

a)por details, see "Enjoying the sound at low volume
(NIGHT MODE)" (page 34).
b)This parameter is only available when SAT/CA TV
input is selected.
c)Por details, see "Preparing for the "BRAVIA"
Sync" (page 39).
d)This parameter is only available when "CTRL
HDMI" is set to "CTRL ON".
e)
When the Auto Calibration result is saved, you can
adjust the setting in 1 inch (1 cm) increment.
o
This parameter is only available when "CENTER
SP" is set to "CENTER YES".
g)This parameter is only available when "SUR SP"
is set to "SUR YES".
h)Por details, see "Performing Auto Calibration"
(page 26).
i)
This parameter is only available when the result of
the Auto Calibration is saved.
j)
This menu is only available when you insert the
S-AIR transmitter (not supplied). For details, see
"Setting up an S-AIR product" (page 48).
k)"PEET" for models of area code U2, CA2 only.
"M CM" for models of area code AR2 only.
You can adjust the level of each speaker to suit
your preference.
• TEST TONE
You can adjust the speaker levels while
listening to the test tone from your listening
position.
To adjust the speaker levels
• FL LEVEL (Front left speaker
level)
• CNT LEVEL (Center speaker
level)
• FR LEVEL (Front right speaker
level)
• SR LEVEL (Surround right
speaker level)
• SL LEVEL (Surround left speaker
level)
• SW LEVEL (Subwoofer level)
60 US
1
Press
+,+
repeatedly until
"TEST TONE" appears, then
press
8
or •.
2
Press
+,+
repeatedly until
"T. TONE ON" appears, then
press
8.
The test tone is emitted from each speaker
in sequence as follows:
Front left
-+
Center
-+
Front right
-+
Surround right
-+
Surround left
-+
Subwoofer
3
Press. until "TEST TONE"
appears.
4
Press
+'+
repeatedly to select
the desired speaker, then press
8
or •.
The test tone is emitted from the speaker
that is being adjusted only.
• FL LEVEL, CNT LEVEL, FR LEVEL,
SR LEVEL, SL LEVEL, SW LEVEL
Notes
• "CNT LEVEL" does not appear when you set
"CENTER NO" in the "SP SETUP" setting.
• "SR LEVEL" and "SL LEVEL" do not
appear when you set "SUR NO" in the
"SP SETUP" setting.
5
Press
+'+
repeatedly to adjust
the speaker level, then press
8·
You can adjust from -6.0 dB to +6.0 dB
in 0.5 dB steps.
Note
If you do not adjust for a certain period, the test
tone is emitted from the next speaker in
sequence.