Troubleshooting - SEVERIN RB 7026 Instrucciones De Uso

Sensors
Electrical contacts
If the appliance will not be used for a long time, empty the dust container, clean the appliance and fully charge the battery
Switch off the appliance and disconnect the charger. We recommend fully charging the battery every 3 months.
Use the table below and the table "Light ring and signal tones" to check whether the problem can be solved:
Problem
Appliance will not switch on.
Appliance stops on its own.
The appliance is not moving.
Immediately after switching on, the
appliance does not move in a straight line
even though the area is clear.
One of the round brushes no longer
rotates.
The appliance will not charge.
Operating time is increasingly shortened.
If you cannot solve the problem using the above table, call our Service Hotline (see contact details in the appendix of this
instruction manual).
Together with our trained service staff, we are sure to find a solution.
24
Monthly
Monthly
When the appliance is not used for a longer period of time

Troubleshooting

Battery is empty.
Charge the battery.
Appliance is not in contact with the floor.
Place the appliance on the floor. It now starts cleaning directly.
The system must be restarted. To do this, open the lid of the appliance and
press the Reset button (using a paperclip or similar). The appliance is then
ready for use again.
Battery needs to be charged.
Charging the Battery.
The appliance has a problem. See Chapter "Acoustic signals and light ring".
Help it along manually by giving it a push.
It is possible that one of the wheels is blocked from turning freely by dirt.
Remove dirt from the wheels. If necessary, carefully use scissors or tweezers
for this purpose.
It is possible that this round brush is prevented from rotating freely by dirt.
Clean the round brush.
The mains adapter is not plugged in correctly.
Check if the mains plug is connected correctly.
The battery is completely discharged and can therefore no longer be
charged.
Contact our customer service.
Dirt may be preventing the wheels from turning freely.
Remove dirt from the wheels.
Dirt may be preventing the brush roller from rotating freely.
Clean debris from the brush roller.
Possible cause / solution
-
-