Buffalo HE154 Manual De Instrucciones página 4

UK
Operation
Lid latch
Water dispense button
(on HE154 only)
Reboil button
Temperature button
1. Lift the latch to open the lid.
2. Fill the appliance with liquid. Do not fill above
the "MAX" line.
3. Close the lid, ensuring it locks firmly in place.
4. Plug in the power cord and connect it to the
mains power supply.
5. The Boiling indicator lights up and the
appliance begins to heat.
6. Press the temperature button to set the
desired water temperature for keeping warm.
(Press the button repeatedly to toggle between
98°C/85°C/60°C/50°C/40°C.)
Note: The appliance will take
approximately 35 minutes to
heat up when filled with cold
water.
7. Once the correct temperature has been
reached, the Keep Warm indicator lights up
and the appliance is ready to dispense.
4
HE154_HF155_ML_A5_v1_20211014.indb 4 HE154_HF155_ML_A5_v1_20211014.indb 4
Display
Lock/Unlock button
Control panel
Spout
Water level
indicator
Warning: There is a danger of scalding
when opening the lid during and after use.
Take care to avoid the expulsion of steam.
Dispense Liquid
1. Hold a suitable receptacle beneath the spout
2. Push the Water
Reboil
It may be necessary to reheat the water in the
appliance.
Press the Reboil button to reboil the water.
Lock/Unlock the control panel
To lock/unlock the control panel, press the Lock/
Unlock button.
Inner pot
HE154
2. Press the receptacle
Dispense button against the switch
behind the spout
Lid
"MAX" level
Handle
Hands free water
dispense switch
(on HF155 only)
Rotary base
HF155
2021/10/14 15:04 2021/10/14 15:04