High Dumping System - Columbus AKS 70 Manual De Instrucciones

The electric high dumping system of the waste container (
Introduction: to unloading, you must insert the parking brake, get out of the sweeper without turning off the ignition key (Part. 1 Fig. 2),
release the hooks (Part. G Fig. 1).
1) To start the lifting of the container, put the switch Part. 1 Fig. 3 back.
2) Begin the lifting. Fig. 4+ 5
3) IMPORTANT: be careful that nothing prevents the complete release of the two supporting legs of the machine (Fig. 6), or the lifting of
the container will stop.
4) IMPORTANT: if the sweeper is switched off or if it was a power failure, to restart the unloading of the container you have to start the
sweeper and misfire the safety switch Part. 1 Fig. 7.
5) Reached the desired height of the container (max 110 cm), you can wrap it with a big bag for waste. Fig. 8
6) Sequence of emptying of the dust container. Always keep with a hand the handle of the waste container.
7) Push the knob (Part. R Fig. 9) down and turn counter-clockwise with one hand keeping the handle of the container also.
8) Now release the dust container by turning the knob (Fig. 9, 10, 11), empty the container into the bag (Fig. 12), put it back removing
the bag and turn the knob to lock it again (Fig. 14, 15).
9) To start the descent of the dust container, pull the lever forward Part. 1 Fig. 16.
10) When the cylinder has finished its run, take the dust container's handle (Part. 1 Fig. 19) with an hand and push with one foot on the
pedal (Part. 2 Fig. 19).
11) When the container arrives at the bottom, close the two hooks (Fig. 20).

HIGH DUMPING SYSTEM

all pictures from page 67 onwards)
26
Vacuum Sweeper
AKS 70|VDM 62