Uline H-5660 Instrucciones De Ensamblaje página 2

3. Slide side panel (3) into slot C and snap into place.
(See Figure 3)
Figure 3
C
4. Slide side panel with hasp (4) into slot B and snap
into place. (See Figure 4)
Figure 4
5. Place front door panel (5) bottom hole onto left
base hinge pin with handle on the right side when
facing side D. (See Figure 5)
Figure 5
PAGE 2 OF 9
ASSEMBLY CONTINUED
3
4
B
Handle
5
Hinge Pin
D
6. Line up top panel (7) top hinge pin with top hole in
front door panel (5). Snap top panel (7) down onto
panels (2, 3 and 4). (See Figure 6)
Figure 6
7. Place two shelf panels (6) flat side up onto shelf
supports on the back and side panels within the
cabinet. (See Figure 7) One shelf can be placed over
sump area.
Figure 7
8. Repeat steps 1-7 for right-hinge door cabinet:
• For step 3: Slide side panel with hasp (4) into slot C
and snap into place.
• For step 4: Slide side panel (3) into slot B and snap
into place.
• For step 5: Place door panel (5) bottom hole onto
right base hinge pin with handle on the left side
when facing D.
9. Place both cabinets together with the handles of
both doors next to each other. (See Figure 8)
10. Place I-beam lock (8) in the two corresponding
snap-lock wells on the top of both cabinets.
(See Figure 8)
Figure 8
7
Hinge Pin
5
6
6
8
0721 IH-5660