Charging The Power Cell - Core CRC 8000 Manual De Instrucciones

CHARGING THE POWER CELL

WARNING:
CORE™ Outdoor Power CRC
8000 rapid charger to charge the
CORE™ Outdoor Power CFC 6500,
18V Li-Ion Power Cell. Charging any
other Power Cells or batteries with
this charger may damage the Power
Cells, batteries, or charger, and
possibly cause serious injury or
property damage from fire, explosion
or hazardous fumes.
1. To charge the CORE™ Power
Cell, place the charger (1) in a dry
location near a 120 V AC, 60 Hz
electrical outlet and plug it into
the outlet (Fig. 1).
2
ASSEMBLY AND OPERATING
Use only the
4
NOTE:
Both the red and green LED's will
turn ON, indicating that power is
actively being supplied to the charger
and that the charger is ready to
charge a Power Cell. If the LED's do
NOT turn ON, the charger is not
receiving power from the electrical
outlet or the charger is not
functioning properly.
2. Insert the CORE™ Power Cell (2)
into the matching cavity (3) in the
top of the charger.
NOTES:
a) Make sure the "TOP" marking (4)
on top of the Power Cell is facing
toward the LED lights (5 & 6) on
the charger.
b) Make sure the Power Cell is
pressed fully into the charger cavity.
3
8
6
5
1