Charging The Power Cell - Core Cub Cadet CESC8000 Manual De Instrucciones

CHARGING THE POWER CELL

WARNING:
CESC8000 standard charger to
charge the CEC6600 Power Cell.
Charging any other Power Cells or
batteries with this charger may
damage the Power Cells, batteries, or
charger, and possibly cause serious
injury or property damage from fire,
explosion or hazardous fumes.
Power Supply Cord: Use UL/CUL listed
detachable power supply cord, type
SPT-2, 18 AWG,three conductors, cord
rate VW-1,105℃ 300V. Cord external
length minimum 1.2 m. One end
terminates in a molded-on attachment
plug with a 15A, 125V (NEMA 1-15P)
configuration. Other end terminates in
a molded-on connector which mates
with the Power Cell charger.
2
ASSEMBLY AND OPERATING
Only use a
4
1. To charge the CEC6600 Power
Cell, after choosing 115V or 230V
on bottom of charger, place the
charger (1) in a dry location and
plug into the appropriate outlet.
NOTES:
a) Once Power cell is fully
charged, charger will stop
charging.
b) Charger can charge one or two
power cells at the same time.
2. Insert the Power Cell (2) into the
matching cavity (3) in the top of
the charger.
NOTES:
a) Make sure the raised ridge (4)
on top of the Power Cell is
facing toward the LED lights (5,
6 & 7, 8) on the charger.
3
9
6
5
8
7
1