Generator Use; Safety Regulations - Mase Generators EASY-D Serie Manual De Uso Y Mantenimiento

MASE
CONGRATULATIONS ON HAVING CHOSEN A MASE PRODUCT.
This manual contains all the necessary information for proper installation and use of the generator.
It's essential, either for the customer's safety and satisfaction or for good reliability of the generator, to carry out proper
installation and a careful pre-delivery test.
A wrong installation or an oversight on testing may compromise the efficiency of the generator and even jeopardize the
customer's safety.
All information and illustrations in this handbook refer to the latest produced model at the time of printing.
For any further information, please get in touch with the nearest MASE SERVICE CENTER, they'll be pleased to help
you at any time.
MASE reserve the right to introduce changes without any prior notice. No part or illustration contained in this handbook
can be reproduced without previous approval by MASE.
Mase Generators S.p.A.
CONTENTS

1) SAFETY REGULATIONS

2) TECHNICAL PARTICULARS DIMENSIONS AND
WEIGHT
3) UNIT COMPONENT-PARTS
4) INSTALLATION AND PRELIMINARY CHECKS
4.1) Unit location
4.2) Battery connection
4.3) Preliminary checks

5) GENERATOR USE

5.1) Starting
5.2) Unit use
5.3) Generator stop
6) MAINTENANCE
7) WIRING DIAGRAM
1) SAFETY REGULATIONS
— Read carefully all the instructions given in this handbook: they are of the utmost importance for correct installation
and use of the unit and for prompt intervention in case of need.
— Do not allow unskilled or untrained people to use the unit.
— Do not allow children or animals to get close to the generator while it's working.
— Do not handle the generator or the remote control panel with wet hands; any misuse may cause electric shocks.
— Exhaust gas contains carbon monoxide and other residues which are injurious to health, therefore it's necessary not
to make the generator work in closed areas.
— Do not make the generator work near those areas where dangers of explosion or fire do exist.
— Any testing of the unit is to be carried out only when the engine is stopped. Possible checks on the generator when
it's running have to be performed only by skilled workers.
— Refuelling must be carried out only when the engine is stopped.
— Earth-connection has to be made through copper cables having 6 sq. mms. Cross-section at least.
GB
11
EASY D