Wiseup C9000 Guia Del Usuario página 5

V. Setting Time/Date Stamp
5.1. Power off the clock camera, remove the Micro SD card and insert it into a
card reader.
5.2. Removable disk drive folder appears.
5.3. Click on the drive in the root directory and inside the root directory, create a
file named "time.txt".
5.4. Write the current date and time in the "time.txt" file with the correct format:
YYYY.MM.DD HH:MM:SS (For example: 2016.04.12 14:24:32). Save this file.
5.5. Restart the camera and the system will upgrade the program automatically.
VI. Charging
6.1. Remove the insulating film from the end of the battery.
6.2. Connect the clock camera to an outlet AC power supply by using the
charger adapter provided.
6.3. The indicator light will glow solid red during the charging process.
6.4. The indicator light will turn off when the camera is fully recharged.
6.5. It will take 4.5 hours to obtain a full charge.
VII. Alarm Clock Basic Setting
Standard Mode Alarm Mode World Time Mode Timer Mode
7.1. TIME SETTING
7.1.1. When the clock camera's LCD display shows standard mode, press the
Set Button once and the hour will start flashing. Use the Up or Down Button to
adjust the current hour.
7.1.2. Press the Set Button once again to save the hour setting and the minute
will start flashing. Use the Up or Down Button to adjust the current minute.
7.1.3. Press the Set Button once again to save the minute setting and the year
will start flashing. Use the Up or Down Button to adjust the current year.
7.1.4. Press the Set Button once again to save the year setting and the month