Wiseup C9000 Guia Del Usuario página 2

II. What's in the Box
-1× Alarm Clock Camera
-1× Remote Controller
-1× USB Cable
-1× AC110-240V to DC5V Charger Adapter
-1× 8GB Micro SD Card (fitted into the Micro SD card slot already)
III. Operation
>> Before using, please make sure that the clock camera is fully recharged.
>> Please make sure the Micro SD card (4GB-32GB) has been formatted
already and is securely fitted into the camera's SD card slot, or it will not work. A
SDHC Class 10 Micro SD card is recommended.
>> Remove the insulating film both from the end of the battery and the remote
controller.
>> If you want the camera to work 24/7 days, please connect the clock camera
to an outlet power supply by using the charger adapter.
[Note]:
1). If no Micro SD card is fitted into the clock camera, the indicator light will keep flashing
blue for 15 seconds and then turn off. The camera will shut down automatically.
2). Once the insulating film is removed from the battery, the clock camera's LCD display
will be illuminated with a piece of music, then the music will stop automatically; if the LCD
display isn't illuminated, please press the Light Button once.
3.1. POWER ON/OFF
3.1.1. Slide the Power Switch to the ON position. Power on the camera by
pressing the Power Button on remote controller once. The indicator light will
glow solid blue, indicating the camera has entered into standby mode
automatically.
3.1.2. Power off the camera by pressing the Power Button on remote controller
once again, and slide the Power Switch to the OFF position. The indicator light
will turn off.